1.Jen-Ching Huang and Chung-Ming Chen, 2014, “The Fabrication of Metallic Atomic Force Microscope Probe by Electrochemical Sharpening”, The Standard International Journals,Accepted. (Corresponding Authors).

2.Jen-Ching Huang and Fu-Jen Cheng, 2014, “The study on the Boltzmann distribution of ideal gas under gravitational field by computer simulation”, Advanced Materials Research, Vol. 939 (2014) pp 584-591. (EI) April 2014 (Corresponding Authors)

3.Jen-Ching Huang, Ho Chang and Hui-Ti Ling, 2014, “The nanostructure fabrication on conductive diamond-like carbon thin film by nano-oxidation technique”, Advanced Materials Research, Vol. 939 (2014) pp 671-678. (EI) April 2014 (Corresponding Authors)

4.Jen-Ching Huang, Yung-Jin Weng, Huail-Siang Liu, Feng -Chin Tsai and Fu-Jen Cheng, 2014, “The study on the ultrasound assisted atomic force microscopy base nanomachining”, Advanced Materials Research, Vol. 939 (2014) pp 684-691. (EI) April 2014(Corresponding Authors).

5.Jen-Ching Huang, Yung-Jin Weng, Huail-Siang Liu, 2014, “A study of the nanomachining and nanopatterning on Different Materials Using Atomic Force Microscopy”, International Journal of Materials &Product Technology, Vol. 49, No. 1, pp. 57–71 (SCI:0.691) April(Corresponding Authors)

6.Jen-Ching Huang, Fu-Jen Cheng,Chun-Song Yang, 2014, “The Study on Young's Modulus of Multilayered Cu/Ni Multilayered Nano Thin Films by Molecular Dynamics Simulation”,Applied Mechanics and Materials,Vols. 513-517 (2014) pp 113-116 (EI) (Corresponding Authors) February, 2014 

7.Jen-Ching Huang, Fu-Jen Cheng, 2014, “The Study on the Nanocutting by Rigid Body Tool at the Gas Environment Using Molecular Dynamics Simulations”,Applied Mechanics and Materials,Vols. 494-495 (2014) pp 400-403 (EI) (Corresponding Authors) February, 2014

8.Jen-Ching Huang, Yung-Jin Weng. 2013, "A Discussion of the Tribological Phenomena under Minimal Load Using Molecular Dynamics", Microsystem Technologies. Vol. 20, No. 3, pp. 349–355 (SCI: 0.827) (published online Sept, 2013) (Corresponding Authors)(2014 March)

9.Jen-Ching Huang, Yung-Jin Weng. 2014, " A Study on the Construction of Nano-oxidation Process Parameter Prediction Model by Combining a Processing Database and Multiple Regression Equation", Microsystem Technologies. Vol. 20, No. 3, pp. 367–378 (SCI: 0.827) (published online, Dec. ,2013 )  (Corresponding Authors) (2014 March)

10.Jen-Ching Huang, Huail-Siang Liu, Cheng-Shuo Xue, Gui-Jia Zhang, Xin-Ming Zhan, 2013, “The Study on the Fabrication of Nanostructure and Nanomold by Nano-oxidation and Hydrofluoric Acid Etching on TiAlN Thin Film”, Journal of the Chinese Society of Mechanical Engineers,Vol. 34, No. 4 pp. 353-359. 1-Aug-2013 (SCI:0.548)(Corresponding Authors)

11.Yung-Jin Weng, Jen-Ching Huang, 2013, “A Discussion on the Development of SCF-CO2 Hot Embossing Molding Technology and Replication Moldability”, Polymer-Plastics Technology and Engineering, Vol. 52, Issue 6, pp. 539-545. (SCI: 1.279). 25-April-2013

12.Jen-Ching Huang, Yi-Chia Liao, Huail-Siang Liu, Fu-Jen Cheng, 2013, “The Study on Deposition Process and Mechanical Properties of Deposited Cu Thin Films Using Molecular Dynamics”, Advanced Materials Research, Vol. 684, pp. 37-41. (EI) April-2013(Corresponding Authors)

13.Chau-Chang Chou, Yi-Yang Wu, Jyh-Wei Lee, Jen-Ching Huang, Chi-Hsiao Yeh, 2013, “Mechanical properties of fluorinated DLC and Si interlayer on a Ti biomedical alloy”, Thin Solid Films, Vol.528, pp.136-142. (SCI:1.809) (2013.01)

14.Jen-Ching Huang, 2012, “Evaluation of Tribological Behavior of Al-Co-Cr-Fe-Ni High Entropy Alloy using Molecular Dynamics Simulation”, Scanning, Vol. 34, pp. 325~331. (SCI:1.333)(Corresponding Authors) September / October 2012

15.Jen-Ching Huang, Jui-Yang Wang, 2012, “The Fabrication and Preservation of Nanostructures on Silicon Wafers with a Native Oxide Layer”, Scanning, Vol. 34, pp. 347~356. (SCI:1.333) (Corresponding Authors) September / October 2012

16.Jen-Ching Huang, Wei-Piao Wu, 2012, “The study on Evaluation of Hybrid Drilling Command under Deep Hole Drilling”, Advanced Materials Research,Vol. 579, pp 219-226. (EI) (Corresponding Authors)

17.Jen-Ching Huang, Shao-Hsun Chang, Hsin-Pei Chen, 2012, “Evaluation of Microstructure and Glass Transition Temperature of Al-Cu-Cr-Fe-Ni High-Entropy Alloy by Molecular Dynamics Simulation”,Advanced Materials Research,Vol. 579, pp 398-406. (EI)(Corresponding Authors)

18.Jen-Ching Huang, 2012, “Fabricating nanostructures through a combination of nano-oxidation and wet etching on the different surface conditions of silicon wafer”, Scanning. Vol. 34, pp. 264~270.(Corresponding Authors) July/August 2012

19.Jen-Ching Huang, Chung-Ming Chen, 2012, “High voltage nano-oxidation in deionized water and atmospheric environments by Atomic Force Microscopy”, Scanning. Vol. 34, pp. 230~236. (Corresponding Authors) July/August 2012

20.Jen-Ching Huang, Wei-Piao Wu, 2012, “The Study on Plate Cam Fabrication and On-Line Measurement by Computer Numerical Control Machine”, Advanced Science Letters, Vol.14, pp. 118~124. (SCI: 1.253) (Corresponding Authors)

21.Jen-Ching Huang, 2012, “Fabrication of a Gecko Seta-like Structure Using Polydimethysiloxane”, International Journal of Adhesion and Adhesives, Vol.36, pp.25~31. (SCI:2.170) (Corresponding Authors).

22.Yung-Jin Weng, Jen-Ching Huang , Hsu-Kang Liu, 2012, “Study of Gray-Scale Curved Surface Magnetic Imprinting Process for Replication of Nano/Micro-Structures Product Design”, Advanced Science Letters, Vol.15, pp.267-271. (SCI: 1.253)20120731

23.Jen-Ching Huang, 2012, “Influence of Strain Rate on Tensile Strength and Deformation Behavior of Nano-Copper Single Crystal”, Advanced Science Letters, Vol.13, pp. 410~416. (SCI: 1.253) (Corresponding Authors)20120630

24.Jen-Ching Huang, Wei-Piao Wu, 2012, “A Combining Instant Center Method and Custom Macro Program for Plate Cam machining by Machining Center”, Journal of the Chinese Society of Mechanical Engineers , Vol.33, No.2, pp.177~182. (SCI:.548) (Corresponding Authors)

25.Chau-Chang Chou, Yi-Yang Wu, Jyh-Wei Lee, Chi-Hsiao Yeh, Jen-Ching Huang, “Characterization and haemocompatibility of fluorinated DLC and Si interlayer on Ti6Al4V”, Surface & Coatings Technology, j.surfcoat.2012.01.020, Available online 18 January 2012. (SCI:1.876)

26.Chun-Mming Lin, Hsien-Lung Tsai, Chang-Lin Lee, Di-Shiang Chou, Sun-Fen Lee, Jen-Ching Huang, Jyun-wei Huang, 2012, “Influence of CO2 Laser Welding Parameters on the Microstructure, Metallurgy, and Mechanical Properties of Mg-Al Alloys”, International Journal of Minerals, Metallurgy and Materials., Vol. 19, Issue 12, pp. 1114-1120. (SCI: 0.691) (December 1, 2012)

27.Chun-Mming Lin, Hsien-Lung Tsai, Chang-Lin Lee, Di-Shiang Chou,Jen-Ching Huang, 2012, Evolution of microstructures and properties of magnesium alloy weldments produced with CO2 laser process”,Materials Science and Engineering: A, Vol. 548, pp. 12-18. (SCI: 2.108) (30 June 2012)

28.Jen-Ching Huang, Yung-Jin Weng, 2012, “Evaluation of the Mechanical Properties of Copper Thin Film and Copper Bulk at the Nano-scale by Nanoindenter”, Applied Mechanics and Materials, Vols. 117-119, pp 394-397. (EI) (Corresponding Authors)

29.Jen-Ching Huang, Chung-Ming Chen, 2012, “The Study on the Atomic Force Microscopy Base Nanoscale Electrical Discharge Machining”,Scanning, Vol. 34, pp. 191~199. (SCI:1.333) (Corresponding Authors)May/June 2012

30.Jen-Ching Huang, Chia-Lin Li, Jyh-Wei Lee, 2012, “The study of nanoscratch and nanomachining on hard multilayer thin films using atomic force microscope”, Scanning, Vol. 34, Issue 1, pp. 51~59, (SCI:1.333) (Corresponding Authors) January / February 2012

31.Jen-Ching Huang, Jyh-Wei Lee, Chia-Lin Li, 2011, “Nano-scratching and nano-machining in different environments on Cr2N/Cu multilayer thin films”, Thin Solid Films, Vol. 519 pp.4992–4996. (SCI:1.909)(Corresponding Authors)

32.Jen-Ching Huang, Y.-J. Weng and J.-W. Lee, 2011, “Evaluation of the Nanofabrication and Corrosion on Copper by In-situ ECAFM”,Journal of Chinese Society of Mechanical Engineers, Vol.32, No.1, pp.61~66. (SCI: 0.548) (Corresponding Authors)

33.Jen-Ching Huang, Cheng-Yi Chiu, 2011, “The Study of Single-walled Nanotube Reinforced Epoxy Composites by Molecular Dynamics”,Polymers & Polymer Composites, Vol. 19, Nos. 4&5, pp. 377~382. (SCI:0.47) (Corresponding Authors)

34.Yung-I Chen, Bo-Lu Lin, Yu-Chu Kuo, Jen-Ching Huang, Li-Chun Chang, Yu-Ting Lin, 2011, “Preparation and annealing study of TaNx coatings on WC-Co substrates”, Applied Surface Science, Vol. 257, Issue 15, pp.6741~6749. (SCI：1.795)

35.Ching-Been Yang, Hsiu-Lu Chiang, Jen–Ching Huang and C-C Chien, 2011, “Analysis of Structure Fabrication on Near Field Photolithography with Experimental Verification”, Journal of Chinese Society of Mechanical Engineers, Vol. 32, No. 5, pp.371~379. (SCI, 0.548)

36.Yung-Jin Weng, Jen-Ching Huang, T. L. Chen, 2011, “Development of an Innovative Magnetic Aided Roller Microtransfer Replica Process and a Study of Microstructure Array Replication”, Proceedings of the Institution of Mechanical Engineers, Part C, Journal of Mechanical Engineering Science. Vol. 225, No. 11, pp.2749-2758. (SCI：0.615)

37.Jen-Ching Huang, Chin-Lin Tsai and Ampere A. Tseng, 2010, “The influence of the bias type, doping condition and pattern geometry on AFM tip-induced local oxidation”, Journal of the Chinese Institute of Engineers, Vol. 33, No. 1, pp. 55-61. (Corresponding Authors)(SCI:0.219)

38.Ampere A. Tseng, Jun-ichi Shirakashi, Shyankay Jou, Jen-Ching Huang, and T. P. Chen, 2010, “Scratch properties of nickel thin films using atomic force microscopy”, J. Vac. Sci. Technol. B 28„1, pp. 202-210.(SCI: 1.460)

39.Jen-Ching Huang, Yung-Jin Weng, Yung-Chun Weng, Yi-Feng Chan, H. K. Liu, 2010, “Effects of Electrolyte Formulas on Electrochemical Polish Planarization of Pure Copper”, Key Engineering Materials, Vols. 447-448 (2010) pp 159-163. (EI) (Corresponding Authors)

40.Yung-Jin Weng, Jen-Ching Huang, Yung-Chun Weng, Sen Yeu Yang, Yong-Cheng Wong, Hsu-Kang Liu, 2010, “A Study on Application of Making Porous Micro-Structural Aluminum Oxide Template by Anodic Aluminum Oxide Processing Technology in Cell Reproduction ”, Key Engineering Materials, Vols. 447-448 (2010) pp 356-360. (EI)

41.Ching-Been Yang, Hsiu-Lu Chiang, Jen–Ching Huang, 2010, “Study on Advanced Nano-Scale Near field photolithography”, Scanning,Vol. 32, Issue 6, p.p. 351–360.(SCI：1.333)

42.Yueh-Chien Lee, Sheng-Yao Hu, Walter Water, Kwong-Kau Tiong, Zhe-Chuan Feng, Yen-Ting Chen, Jen-Ching Huang, Jyh-Wei Lee, Chia-Chih Huang, Jyi-Lai Shen, Mou-Hong Cheng, 2009,”Rapid thermal annealing effects on the structural and optical properties of ZnO films deposited on Si substrates”, Journal of Luminescence Vol. 129, Issue 2, p.p. 148-152.  (SCI：1.847). (Feb. 2009)

43.J. C. Huang, Y.J. Weng, S.Y. Yang, Y.C. Weng, and J. Y. Wang, 2009, “Fabricating Nanostructure by Atomic Force Microscopy”, Japanese Journal of Applied Physics, Vol. 48, pp095001-1~095001-5. (Corresponding Authors) (SCI：1.138) (2009.9.24)

44.Zone-Ching Lin, Jen-Ching Huang, Chun-hui Yeh, 2009, “Error analysis and regression mode of the V-grooved sample in the Atomic Force Microscope simulation measurement mode by the molecular mechanics”, Scanning, Vol. 31, Issue 4, p.p. 147 - 159. (Nov. 2009) (SCI：1.256)

45.S. Y. Hu, Y. C. Lee, J. W. Lee, J.C. Huang, J. L. Shen and W. Water, 2008,” The structural and optical properties of ZnO/Si thin films by RTA treatments”, Applied Surface Science, Vol. 254 pp.1578-1582. (SCI：1.161) 2008/1/15

46.Zone-Ching Lin and Jen-Ching Huang, 2008,” The study of estimation method of cutting force for Conical Tool under Nanoscale Depth of Cut by Molecular Dynamics”, Nanotechnology Vol.19 , pp115701-1~115701-13 (SCI：3.137).

47.Zone-Ching Lin and Jen-Ching Huang, 2008, “The influence of different cutting speeds on the cutting force and strain-stress behaviors of single crystal copper during nano-scale orthogonal cutting”, Journal of Materials Processing Technology, Vol. 201, Issues 1-3, 26 (May 2008), pp. 477-482. (SCI：1.420).

48.Zone-Ching Lin, Jen-Ching Huang and Yen-Chieh Chao, 2008,” A Study of Deformation and Stress-Strain Distribution of Nano-scale Rod Under Bending Load by Molecular Dynamics and FEM”, Journal of the Chinese Society of Mechanical Engineers, Vol.29, No. 1pp.1-10. (SCI: 0.548)

49.Zone-Ching Lin, Jen-Ching Huang and Yen-Chieh Chao, 2008,” The Study of Deformation and Stress-Strain Distribution of Nano-scale Thin Sheet Copper under the Biaxial Tensile Loads by Using Molecular Dynamics and FEM Technique”, Proceedings of the Institution of Mechanical Engineers, Part C, Journal of Mechanical Engineering Science, Vol. 222, No. 6 pp.1097-1107. (SCI：0.416) (June,2008)

50.Y.J. Weng, Y.C Weng, S.Y. Yang, J.C. Huang, H.S. Fang and J.L. Wong, 2008, “A Study of an Innovative Technology for Manufacturing Optical Waveguides Based on Vacuum-Assisted Micromolding”,Polymer-Plastics Technology and Engineering, Vol. 47, Issue 11, p.p. 1170-1173. (SCI：0.420) (November 2008)

51.Zone-Ching Lin, Zhen-Da Chen and Jen-Ching Huang, 2007,” The Establishment of Cutting Force Model and the Study of Stress-Strain Distribution in Nano-scale Copper Material Orthogonal Cutting”,International Journal of Advanced Manufacturing Technology, Vol. 33, No.5-6, pp.425-435. (SCI：1.128) (June)

52.Zone-Ching Lin, Jen-Ching Huang and Bo-Jhan Zeng, 2007,”The Analysis on the offset error of cross-section contour by using the simulated measurement model of atomic force microscopy”, Journal of the Chinese Society of Mechanical Engineers, Vol. 28, No. 1, pp.23-33. (SCI, 0.548)

53.Ship-Peng Lo, Yeou-Yih Lin and Jen-Ching Huang, 2007,” Analysis of Retaining Ring using Finite Element Simulation in Chemical Mechanical Polishing Process”, International Journal of Advanced Manufacturing Technology, Vol. 34, No.5-6, pp.547-555. (SCI：1.128) September, 2007.

54.Zone-Ching Lin and Jen-Ching Huang, Yeau-Ren Jeng, 2007, ”3D Nano-scale Cutting Model for Nickel Material”, Journal of Materials Processing Technology, Volumes 192-193, 1 October 2007, Pages 27-36  (SCI：0.615)

55.Zone-Ching Lin and Jen-Ching Huang, 2004,”A nano-orthogonal cutting model based on a modified molecular dynamics technique”,Nanotechnology, 15, 510-519. (SCI：3.137)

56.Zone-Ching Lin and Jen-Ching Huang, 2004,” A study on rigid body boundary layer interface force model for stress calculation and stress-strain behaviour of nanoscale uniaxial tension”, Nanotechnology, 15,1509–1518. (SCI：3.137)

57.Jyh-Wei Lee, Jen-Ching Huang, Jenq-Gong Duh, 2004,"Nano mechanical properties evaluation of R.F. magnetron sputtered chromium nitride thin film”, Tamkang Journal of Science and Engineering, No.4, Vol.7, pp.237-240. (EI)

58.Zone Ching Lin and Jen Ching Huang, 2000, “The Fixture Planning of Modular Fixture for Measurement”, IIE Transcation on Design and Manufacturing, Volume 32, Number 4, pp. 345-359. (EI)

59.Zone Ching Lin and Jen Ching Huang, 1997,“The Application of the Simulated Annealing Method and Heuristic Algorithms in the Selection of Fixture Elements “, International Journal of Advanced Manufacturing Technology , Volume 13, Number 3, pp191- 205 (SCI:0.39)

60.Zone Ching Lin and Jen Ching Huang, 1997, August,“The Application of Neural Networks in Fixture Planning of Pattern Classification “ ,Journal of Intelligent Manufacturing , Volume 8 , Number 4 , pp307-322. (SCI: 0.286)

國內期刊論文

國內期刊論文

1.巫維標、黃仁清、黃亦祥, 2013, “-中型油壓機械之壓座台基準平面加工技術”, 智慧自動化產業期刊, No.6, pp.2-11.

2.巫維標、黃仁清, 2012, “PCB印刷電路板壓合加熱板定位溝槽之加工技術”, 自動化科技大展－產學合作技術報告期刊 pp.76-79.

3.黃仁清、巫維標, 2010, "應用觀念圖像於數值控制工具機教學上之研究", 東南學報第35期, pp65-74. (2010/7)

4.黃仁清、詹益峰、陳銘震, 2010, "以純銅進行電解拋光平坦化之研究", 東南學報第35期, pp55-64. (2010/7)

5.王玫、黃仁清, 2009, “視覺藝術統整課程之行動研究：以關懷教育出發之議題設計”,萬竅-中華通識教育學刊,第10期, pp.51-84.(2009/11/1)

6.巫維標、黃仁清, 2009, “龍門式CNC加工機側銑頭(RAH)尺寸精度誤差補正技術” ,台灣製造工程與自動化科技協會產學合作成果專刊, pp71 ~ 74, 98年8月。

7.黃仁清, 2009,” 不同固定端形式之扶手型單壁奈米碳管楊氏係數探討”, 台灣奈米會刊(Taiwan nano newsletter), No.16, pp.56-67, 98年4月.

8.郭裕竹,李志偉,張麗君,陳永逸,王朝正,黃仁清, 2009, “以液態原子力顯微鏡即時觀察合金薄膜剝除行為之研究”, 防蝕工程, Vol.23, No. 1,pp.59-66. (2009 年3 月)

9.李志偉,黃仁清,李朝聖,張永鵬,康淵,2007,單晶銅於奈米壓入之不連續應變現象, 先進工程期刊.Vol. 2, No. 2, pp.101-104.

10.黃仁清, 2007,銅在奈米等級之機械性質探討, 東南學報第31期. pp41-54.

11.李志偉, 陳芃孜, 陳弘凱, 杜正恭, 黃仁清, 2005, "以電化學原子力顯微鏡進行420不銹鋼於氯化鈉水溶液之即時腐蝕行為研究",防蝕工程, 第19卷第3期, pp.415-424 (2005,9).

12.黃仁清、巫維標, 2005, "應用巨指令於平板凸輪加工與線上測量之研究", 東南學報第29期, pp265-274.

13.巫維標、黃仁清, 2005, "超大型平面元件之銑削路徑與銑削參數對真平度影響之探討", 東南學報第29期, pp255-264.

14.巫維標、黃仁清, 2005, "超大型平面之銑削加工技術探討-以大型油壓機械之基準面元件為例", 東南學報第28期,pp233-242.

15.黃仁清、李志偉、許良瑋, 2005, "應用電化學原子力顯微鏡即時量測銅材料在純水與外加偏壓下奈米級表面形貌變化之研究",東南學報第28期, pp223-232.

16.黃仁清、李志修，2005，”結合RV-M1機械手與接觸式量測探頭於平面量測之可行性研究”， 機電整合 ，82期，6月號，pp.165-174。

17.黃仁清、李志偉、蔡世鴻、許嘉倫、鄭雲涵,2005,”SK3碳鋼在水中的即時微觀氧化現象探討”，機電整合，79，3月號, pp149-153,2005。

18.黃仁清，郭訪璇，李勝全，傅啟舜, 2004,”結合Visual Basic與PLC於小型自動倉儲系統設計與製作之研究”，機械技術，229，3月號，pp133~140。

19.黃仁清、李志偉, 2004, "原子力顯微鏡量測技術研究", 東南學報，第26期, pp41~52.

20.黃仁清，九十二年二月，” 分子動力學應用探討”,東南學報，第二十五期, pp137~146。

21.林榮慶，黃仁清，九十一年十二月，”奈米科技與自動化”，機械月刊，329期，pp26~32。

22.黃仁清,九十一年一月,”數值控制工具機NC程式教學上之研究”,東南學報，第二十四期 , pp49~55.

23.黃仁清,九十年五月,”游標卡尺之游標差動原理設計公式之研究”,機械技術,195期,pp196~198.

24.巫維標,黃仁清,九十年三月,”應用巨指令於迴轉型從動件之圓柱凸輪加工研究”,機械技術,193期 , pp162~167.

25.黃仁清,八十九年十二月,”結合光通訊器於AGV派車單元之研究”,機械技術,190期,pp114~119.

26.黃仁清,巫維標,八十九年十二月,”多段參數式鑽削指令之發展與加工行為之研究”,模具技術資訊,No.69,pp30~34.

27.黃仁清, 林士博,八十九年十一月,”以綜合加工中心基於平板凸輪加工之新方式”,機械技術,189期,pp168~172.

28.黃仁清,林士博,徐建勳,蔡銘勳,八十九年一月,”以數控工具機之巨指令為基礎進行三層龍珠加工之研究”,機械技術,179期,pp66~71.

29.黃仁清,巫維標,八十八年十二月,”應用綜合加工中心機於逆向工程之大型曲面量測”,東南學報，第二十二期,p73~81.

30.黃仁清,林士博,徐建勳,八十八年十一月,”電腦數值控制工具機加工製程之研究”,模具技術資訊,No.56,pp28~35.

31.黃仁清,八十七年十二月,”應用灰色關聯分析於塑膠射出成型製程規劃”,東南學報，第二十一期,pp69~77.

32.黃錦鐘,黃仁清,八十七年九月,”超硬合金胚件不良品原因之探討”,亞太模具科技月刊, p51 ~ 57.

33.黃仁清,林榮慶,八十六年十二月,”應用模組化夾具於CMM之夾持規劃”,東南學報,第二十期,pp65-88 .

34.林榮慶 , 黃仁清,八十五年一月,”量測用模組化夾具之夾持規劃概要” , 自動化協會季刊 , pp31-39.