現任:

東南科技大學機械系主任

機械工程研究所所長

工程與電資學院院長

經歷:

東南科技大學機械系教授

高工機械科教師

機械廠技術員

連絡資訊:

東南科技大學台北縣深坑鄉北深路三段152號

E-mail:   klwu@mail.tnu.edu.tw

Tel: 02-86625915、02-86625916 ext 20

Cell Phone: 0921194862

Fax: 02-86625919

 (A) 期刊論文

1. Kun Ling Wu, Biing Hwa Yan, Fuang Yuan Huang and Shin Chang Chen, Improvement of      surface finish on SKD steel using electro-discharge machining with aluminum and surfactant added dielectric, International Journal of Machine Tools and Manufacture , Vol. 45, No.10, (2005) pp.1195-1201.

2. Biing Hwa Yan, Kun Ling Wu, Fuang Yuan Huang, Chun Chieh Hs, A study on the mirror surface machining by using a micro-energy EDM and the electrophoretic deposition polishing, The International Journal of Advanced Manufacturing Technology, 34, (2007) pp.96-103.

3. Jung-Chou Hung, Wei-ChiehWu, Biing-Hwa Yan, Fuang-Yuan Huang and Kun-Ling Wu, Fabrication of a micro-tool in micro-EDM combined with co-deposited Ni–SiC composites for micro-hole machining, Journal of Micromechanics and Microengineering, (2007) pp.763-774.

4. Hai-Ping Tsui, Biing Hwa Yan, Kun. Ling. Wu and W. C. Wu, Optimizing Electrochemical Buffing Control Parameters for Surface Finishing of  Ultrahigh Purity Components, Advanced Materials Research, Vol. 24-25, (2007) pp. 109-116.

5. Kun Ling Wu, Biing Hwa Yan, Jyh Wei Lee and Chun Gian Ding, Study on the characteristics of electrical discharge machining using dielectric with surfactant, Journal of Materials Processing Technology. Vol. 209, (2009) pp. 3783-3789.

6. Chih Ping Cheng, Kun-Ling Wu, Chao Chuang Mai, Yu Shan Hsu and Biing Hwa Yan Magnetic field-assisted electrochemical discharge machining, journal of micromechanics and microengineering, Vol. 20, (2010) pp.1-7. (Corresponding author)

7. Chih Ping Cheng , Kun-Ling Wu, Chao Chuang Mai , Cheng Kuang Yang ,Yu Shan Hsu and Biing Hwa Yan, Study of gas film quality in electrochemical discharge machining, International Journal of Machine Tools & Manufacture, Vol.50, (2010) pp.689-697. (Corresponding author)

8. Wei Liang Ku, Han Ming Chow, Jiang Long Lin, Kun-Ling Wu and Tsong-Shin Sheu, Optimization of Multi-Response Problems Using Taguchi’s Quality Loss Function Based on Grey Relational Grade, Advanced Materials Research, Vol.154-155 , (2011) pp.1643-1654.

9. Po-Huai Yu, Kun-Ling Wu, Shin-Min Lee, and Biing-Hwa Yan, Effect of Voltage Supply Mode on Electrolytic Machining of Polycrystalline Silicon, Materials and Manufacturing Processes, Vol. 26, (2011), pp.1459–1465.

10. Hai-Ping Tsui, Jung-Chou Hung, Kun-Ling Wu, Jyun-Cin You, and Biing-Hwa Yan, Fabrication of a Microtool in Electrophoretic Deposition for Electrochemical Microdrilling and in Situ Micropolishing, Materials and Manufacturing Processes, Vol. 26, (2011), pp. 740-745.

11. Cheng-Kuang Yang, Kun-Ling Wu, Jung-Chou Hung , Shin-Min Lee , Jui-Che Lin and Biing-Hwa Yan, Enhancement of ECDM efficiency and accuracy by spherical tool electrode, International Journal of Machine Tools & Manufacture, Vol.51, (2011), pp. 528-535.

12.Po-Huai Yu, Jung-Chou Hung, Shin-Min Lee, Kun-Ling Wu and Biing-Hwa Yan,Machining Characteristics of Magnetic Force-Assisted Electrolytic Machining for Polycrystalline Silicon, Advanced Materials Research, Vol. 325 (2011), p 523-529.

13. Kun Ling Wu, Shin Min Lee, Kai Yu Jheng, Polishing Optical Glass by Mechanochemical Machining, Applied Mechanics and Materials, Vol.236-237, (2012). pp.428-433.

14.Chin-Chang Yeh, Kun-Ling Wu, Jyh-Wei Lee, Biing-Hwa Yan, Study on surface characteristics using phosphorous dielectric on wire electrical discharge machining of polycrystalline silicon, The International Journal of Advanced Manufacturing Technology, Vol.69, (2013), pp.71-80.

15.Wei-Chan Chen, Kun-Ling Wu, Biing-Hwa Yan, Man-Chin Tsao, A study on the magneto-assisted spiral polishing on the inner wall of the bore with magnetic hot melt adhesive particles (MHMA particles), International Journal of Advanced Manufacturing Technology, Vol.69, (2013), pp.1797-1801.

16. Kuan-Yuan Kuo , Kun-Ling Wu , Cheng-KuangYang ,Biing-Hwa Yan, Wire electrochemical discharge machining (WECDM) of quartz glass with titrated electrolyte flow, International Journal of Machine Tools & Manufacture, Vol.72 (2013), pp.50-57.

17.Chin-Chang Yeh, Kun-Ling Wu, Jyh-Wei Lee, Biing-Hwa Yan, Processing characteristics using phosphorous dielectric on wire electrical discharge  machining of polycrystalline silicon, Materials and Manufacturing Processes, Vol.28, (2014), pp.146-152.

18. A-Cheng Wang, Lung Tsai, Yan-Cherng Lin, and Kun-Ling Wu, Evaluation of Rheological Properties of Gel Abrasive in Magnetic Abrasive Finishing, Advances in Mechanical Engineering, Vol.2013 (2013), pp.1-7.

19. Hsin-Jen Chen, Kun-Ling Wu, Biing-Hwa Yan, Dry Electrical Discharge Coating Process on Aluminum by Using Titanium Powder Compact Electrode, Materials and Manufacturing Processes, Vol.28 (2013),  pp.1286-1293..

20. Kun Ling Wu, Shin Min Lee, Kuan Hwa Chin, Application of electrochemical discharge machining to micro-machining of quartz, Advanced Materials Research Vol. 939, (2014), pp. 161-168.

 21. 吳坤齡，張文獻，東南學報，不同鈦電極於氮氣中進行鋁合金表面放電加工披覆之      研究，第三十九期，中華民國一○三年四月出版，第1-12頁。

22. Shin Min Lee, Kun Ling Wu, Characteristics of Electrophoretic Deposition-Assisted Polishing Using Bamboo Charcoal, Applied Mechanics and Materials, Vol. 575, (2014), pp. 264-267

 23. Kun Ling Wu, Po-Huai Yu, Magnetic force-assisted electrolytic machining for polycrystalline silicon, International Journal of Precision Engineering and Manufacturing, Vol. 16 (7) (2014), pp. 1391-1397

24. Kuan Yuan Kuo, Kun-Ling Wu, Cheng Kuang Yang, Biing-Hwa Yan, Effect of adding SiC powder on surface quality of quartz glass microslit machined by WECDM, The International Journal of Advanced Manufacturing Technology, Vol. 78, (1) (2014), pp 73-83.

25. Wei-Chan Chen, Kun-Ling Wu, Biing-Hwa Yan, A study on the application of newly developed magneto-elastic abrasive to improving the surface roughness of the bore, The International Journal of Advanced Manufacturing Technology, Vol.73, (2014), pp.1557-1566.

26. Yi-Hsun Lee, Kun-Ling Wu, Chung-Ting Bai, Chen-Yuan Liao, Biing-Hwa Yan, Planetary motion combined with two-dimensional vibration-assisted magnetic abrasive finishing, The International Journal of Advanced Manufacturing Technology, Vol.76, (9) (2015), pp.1865-1877

27.Hsin-Jen Chen, Kun-Ling Wu, Biing-Hwa Yan, Characteristics of Al alloy surface after EDC with sintered Ti electrode and TiN powder additive, International Journal of Advanced Manufacturing Technology, Vol.72 (1), (2014), pp.319-332

28. Kuo-Hsia Ling, Yiin-Kuen Fuh, Kun-Ling Wu,Tin-Chun Kuo, Chung-Yu Huang, Groove configurations of a flux-cored arc welding process used in critical structures of precision mechanical presses—mechanical and metallurgical studies, The International Journal of Advanced Manufacturing Technology, Vol.78 (9), (2015), pp.1905-1916

 29. Kun Ling Wu ,Po Huai Yu, Magnetic force-assisted electrolytic machining for polycrystalline silicon, International journal of precision engineering and manufacturing, Vol. 16, (7), (2015), pp. 1391-1397

30. Lieh-Dai Yang, Kun-Ling Wu, Chin-Chang Yeh, Hsin-Min Lee, Study on Precision Polishing Technology Combining  Electrophoresis and Magnetic finishing, International Journal of Materials Science and Applications, Vol. 5, (6), (2016), PP. 235-240

31. Kun-Ling Wu, Hsin-Jen Chen, Hsin-Min Lee, Jie-Shing Lo, Machining of Molybdenum by EDM-EP and EDC Processes, Materials Science and Engineering, 281 (2017), 012030 doi:10.1088/1757-899X/281/1/012030

32. Lieh-Dai Yang, Kun-Ling Wu, Yue-Mei Lai, Yu- We Huang, Study on Precision Polishing of Alumina Ceramics, Materials Science Forum, Vol. 926, (2018), pp. 64-69

33. Jie Shing Lo, Chang Tai Jiang, Kun Ling Wu, Effect of Slotted Electrodes on Improvement in Machining Performance of Large-Scale Electrical Discharge Machining, Journal of Engineering Manufacture, (2018), pp. 756–765

(B) 國際研討會論文

1. Zhi-Ping Zheng, Kun-Ling Wu, Yu-Shan Hsu, Fuang-Yuan Huang, Biing-Hwa Yan, Feasibility of 3D Surface Machining on Pyrex Glass by Electrochemical Discharge Machining (ECDM), Asian Electrical Machining Symposium ’07, PP. 98-103 (NOV. 28- NOV. 30, 2007, Nagoya, Japan), PP.98-103.

2. A.C. Wang, K.L. Wu, L.C. Yuan, Study the re-sticky phenomenon of powder metallurgy debris in the electrical discharge machining, Asian Electrical Machining Symposium ’07, (NOV. 28- NOV. 30, 2007, Nagoya, Japan), PP. 27-31.

3. Hai Ping Tsui, Jung Chou Hung, Kun Ling Wu, Jyun Cin You and Biing-Hwa Yan, Fabrication of a micro tool in electrophoretic deposition for electrochemical micro drilling and in situ micro polishing, Asian Symposium for Precision Engineering and Nanotechnology 2009 (NOV. 13- NOV. 15, 2009, Kitakyushu, Japan), PP.1-5.

4. Chih Ping Cheng,  Kun Ling Wu, Chao Chuang Mai, Yu Shan Hsu, Biing-Hwa Yan, Efficiency Improvement of Electrochemical Discharge Machining by a Magnetic field-assisted Approach, The 16th International Symposium on Electromachining, (April 19-23, 2010, Shanghai, China), PP.471-475.

5. Kun Ling Wu, Chih Ping Cheng, Chao Chuang Mai, Yu-Shan Hsu, Biing-Hwa Yan, Factor Influencing the Gas Film Performance of Electrochemical Discharge Machining, The 16th International Symposium on Electromachining,( April 19-23, 2010, Shanghai, China), PP.477-482.

6. Po-Huai Yu, Jung-Chou Hung, Shin-Min Lee, Kun-Ling Wu and Biing-Hwa Yan,Machining Characteristics of Magnetic Force-Assisted Electrolytic Machining for Polycrystalline Silicon, The 14th International Symposium on Advances in Abrasive Technology, (Sep. 19~21,2011,Stuttgart, Germany)

    7.Kun Ling Wu, Shin Min Lee and Kai Yu Jheng, Polishing Optical Glass by Mechanochemical Machining, 2012 3rd International Conference on Information Technology for Manufacturing Systems (ITMS 2012), (Sep. 8-9, 2012, Qingdao , China)

     8.Chin-Chang Yeh, Kun-Ling Wu, Jyh-Wei Lee and Biing-Hwa Yan, Study on processing characteristics by using dielectric with phosphorous on wire electrical discharge machining polycrystalline silicon, 15th International Conference on Advances in Materials & Processing Technologies Conference, (Sep. 21-26, 2012,Wollongong)

9. Shin Min Lee, Kun Ling Wu, Biing Hwa Yan, Study of Friction Characteristic on Profile of Metal Machining Surface, 16th International Conference on Advances in Materials & Processing Technologies Conference, (Sep. 22-26, 2012, Taipei)

10.Kun Ling Wu, Shin Min Lee, Kuan Hwa Chin, Application of Electrochemical Discharge Machining to Micro-Machining of Quartz, 16th International Conference on Advances in Materials & Processing Technologies Conference, (Sep. 22-26, 2012, Taipei)

11.Jen-Ching Huang , Wei-Piao Wu , Zhi-Wei Du , Kun Ling Wu and Feng -Chin Tsai, The Study on the Large-area Flat Plane by Using Electro-rheological Fluid Polishing, 16th International Conference on Advances in Materials & Processing Technologies Conference, (Sep. 22-26, 2012, Taipei)

12.Kun Ling Wu, Shin Min Lee and Po Huai Yu, Magnetic force-assisted electrolytic machining for polycrystalline silicon, International Symposium on Green Manufacturing and Applications--ISGMA 2014 Proceedings, Jun. 24-28, 2014, Busan, Korea)

13.Shin Min Lee, Kun Ling Wu, Characteristics of Electrophoretic Deposition-Assisted Polishing Using Bamboo Charcoal, 2014 2nd International Conference on Mechanical, Automotive and Materials Engineering (CMAME 2014), (May 26-28, Singapore)

14.Hsin-Jen Chen, Kun-Ling Wu, Electrical Discharge Coating Process with Sintered TiN Electrodes, The International Conference on Machining, Materials and Mechanical Technologies, (31 Aug.- 5 Sep. 2014, Taipei, Taiwan)

15.Yi-Hsun Lee, Kun-Ling Wu and Biing-Hwa Yan, The Development of Magnetic Abrasive Finishing with Two-Dimensional Vibration Assisted, The International Conference on Machining, Materials and Mechanical Technologies, (31 Aug.- 5 Sep. 2014, Taipei, Taiwan)

16.Kuan-Yuan Kuo, Kun-Ling Wu, Cheng-Kuang Yang and Biing-HwaYan, Effect of adding graphite and SiC powders on surface quality of quartz glass machined by WECDM under titrated electrolyte flow, The International Conference on Machining, Materials and Mechanical Technologies, (31 Aug.- 5 Sep. 2014, Taipei, Taiwan)

17. Kuan-Yuan Kuo, Kun-Ling Wu and Biing Hwa Yan, Study of WECDM under titrated electrolyte flow with addition of SiC Powder, The 8th Manufacturing Institute for Research on Advanced Initiatives (MIRAI-2015), (Mar.25 – 27, 2015, Kaohsiung, Taiwan)

18. Yi-Hsun Lee, Kun-Ling Wu and Biing-Hwa Yan, A Study of Magnetic Polishing for SUS304 Curve Surface with Planetary Bodies Combined Two-Dimensional Vibration, The 8th Manufacturing Institute for Research on Advanced Initiatives (MIRAI-2015), (Mar.25 – 27,  2015, Kaohsiung, Taiwan)

19. Kun-Ling Wu, hin-Chang Yeh, Hsin-Min Lee and Biing-Hwa Yan, The Effect on Polycrystalline Silicon Surface Characteristic by Electrical Chemical Machining Grinding using Graphene Oxide Suspension, International Symposium on Green Manufacturing and Applications ISGMA 2015, (Jun. 23.- 27. Qingdao, China)

20. Hsin-Min Lee, A-Cheng Wang, Kun-Ling Wu, Chin-Chang Yeh and Yu-Lei Wu, Experimental investigation on oil and water mixture slurry for polishing by solid and liquid states, International Symposium on Green Manufacturing and Applications ISGMA 2015, (Jun. 23.- 27. Qingdao, China)

 (C) 國內研討會論文

1. 吳坤齡、 陳世昌、 顏炳華、 黃豐元， "界面活性劑對工具鋼放電加工面之改善效果"， 中國機械工程學會第二十屆全國學術研討會， D(上)， pp.1023-1030，( 2003)。

2.吳坤齡、 丁純乾、 顏炳華、 黃豐元， "添加界面活性劑對放電加工特性的影響"，中國機械工程學會第二十一屆全國學術研討會， D(Ⅱ)， pp.4541-4546， (2004)。

3.吳坤齡、 王藝真、 顏炳華、 黃豐元、 卓漢明，“噴塗製程對模具鋼放電加工面的改善研究”，中國機械工程學會第二十二屆全國學術研討會， D06-019， pp.1-6, (2005)。

4. 吳坤齡、許俊傑、顏炳華、黃豐元、卓漢明，“放電結合電泳拋光的鏡面加工技術研究"，中國機械工程學會第二十三屆全國學術研討會，D6-030， (2006)。

5. 鄭志平、吳坤齡、王家威、林瑞寬、黃豐元、顏炳華， “界面活性劑改善玻璃微孔電化學成形精度之影響"，中國機械工程學會第二十三屆全國學術研討會，D6-022，(2006)。

6. 洪榮洲、吳瑋榤、顏炳華、黃豐元、吳坤齡，“結合微放電與複合電鍍沉積之精微加工研究"，中國航空太空學會/中華民航學會聯合學術研討會，pp.1-8， (2006)。

7. 林朝慨、吳坤齡、宋上漢、高漢松、顏守舷， ”HDPE/Mica 奈米複合材料之製備與機械性質研究”，第五屆精密機械與製造技術研討會論文集，C901-C903， (2007)。

8. 鄭志平、吳坤齡、黃豐元、顏炳華、鄭偉欣，”電化學放電加工硼矽玻璃之微流道成形技術研究”，中國機械工程學會第二十四屆全國學術研討會, CSME 3885-3890，(2007)。

9. 崔海平、許笙載、吳坤齡、顏炳華、張振暉, ”應用電泳沉積法於放電表面鏡面拋光研究”, 中國機械工程學會第二十四屆全國學術研討會，CSME 3736-3741， (2007)。

10. 李新民、吳坤齡、卓漢明、顏炳華, ”披覆型磨擦鑽的鑚孔特性”，中國機械工程學會第二十四屆全國學術研討會，CSME 3794-3799，(2007)。

11. 吳坤齡、顏炳華、黃豐元、陳美惠， “應用化學機械拋光法於玻璃基板表面拋光之研究”，中國機械工程學會第二十五屆全國學術研討會，CSME 363， (2008)。

12. 鄭志平、吳坤齡、許玉山、黃豐元、顏炳華， “電化學放電加工之氣膜品質特性研究”， 中國機械工程學會第二十五屆全國學術研討會，CSME 357， (2008)。

13. 鄭志平、吳坤齡、許玉山、顏炳華，“硼矽玻璃的磁場輔助電化學放電加工技術研究”， 中國機械工程學會第二十六屆全國學術研討會，D02-016，(2009)。

14. 吳坤齡、李新民、王阿成、楊邦遠，”機械化學拋光法應用於光學玻璃拋光之研究”， 中國機械工程學會第二十六屆全國學術研討會，D02-029，(2009)。

15. 吳坤齡、葉金璋、黃繼賢、顏炳華，”結合電泳與磁力研磨之精密拋光研究”， 中國機械工程學會第二十六屆全國學術研討會，D02-030，( 2009)。

16. 李宜勳、吳坤齡、周展煌、蔡永興、顏炳華，”二維振動輔助磁力研磨之設備開發與其應用”，中國機械工程學會第二十七屆全國學術研討會，D--pp.1055-1060，(2010)

17. 楊程光、吳坤齡、李新民、林瑞哲，顏炳華，”應用球狀電極改善石英之電化學放電加工特性研究”，中國機械工程學會第二十七屆全國學術研討會，D-pp.1061-1066 (2010)。

18. 游博淮、吳坤齡、李新民、顏炳華、黃豐元，”電解加工多晶矽材料之研究”，中國機械工程學會第二十七屆全國學術研討會，D-pp.1067-1072，(2010)。

19. 吳坤齡、楊程光、鄭志平、黃彥碩、顏炳華，”利用電化學放電加工對石英微細加工之研究”，中國機械工程學會第二十七屆全國學術研討會，D-pp.1073-1078，(2010)。

20. 黃錦鐘、陳紹賢、吳坤齡，”射出成形件活鏈彎折壽命之驗證”，中國機械工程學會第二十七屆全國學術研討會，D-pp.1310-1314，(2010)。

21. 吳坤齡,利用可調變磁場輔助電化學放電加工及其3D微加工之應用，100 年度 機械固力學門研究成果發表會，台中，(2011)。

22. 林軍屹、楊程光、吳坤齡、洪榮洲、顏炳華，應用磁力輔助提升電化學放電加工之氣膜穩定性研究，中國機械工程學會第二十八屆全國學術研討會，D02-16，台中，(2011)。

23. 吳坤齡、鄭志平、李新民、林秉威，竹炭拋光矽晶圓之特性研究，中國機械工程學會第二十八屆全國學術研討會，D01-62，台中，(2011)。

24. 李宜勳、吳坤齡、蔡永興、白崇廷、顏炳華，應用可撓式磁力輔助拋光工具之二維振動研究，中國機械工程學會第二十八屆全國學術研討會， D01-59，台中，(2011)。

25. 吳坤齡、蔡豐欽、黃道義、鄭凱宇，車輛排氣系統回壓控制之研究，中華民國第十七屆車輛工程學術研討會，G-010，南投，(2012)

   26. 陳一維, 王亞平,朱明輝, 吳坤齡, 康淵，往復預壓式節流器力學設計探討，中華民國力學學會第三十六屆全國力學會議，中壢，(2012)

27. 吳坤齡，結合氣注式導線眼模與磁流體對流於走線式電化學放電加工品質改善之研究，101年度 國科會工程處機械固力學門研究成果發表會，Post-228，高雄，(2012)

28. 郭寬淵、吳坤齡、李新民、顏炳華，應用電解液以滴定方法於TW-ECDM加工石英玻璃之研究，中國機械工程學會第二十九屆全國學術研討會，高雄，(2012)

   29.吳坤齡、李新民、林軍屹、楊程光、顏炳華，應用可調變磁場提升電化學放電加工性 能之研究，中國機械工程學會第二十九屆全國學術研討會，高雄，(2012)

30.吳坤齡，氮氣中進行放電加工被覆氮化鈦(TiN)的研究，102 年國科會工程處機械固力、熱流、能源學門聯合成果發表會，宜蘭，(2013)

31. 顏炳華、郭寬淵、王仕偉、鐘森富、吳坤齡，應用KOH、NaOH電解液滴定方式於WECDM加工石英玻璃之研究，中國機械工程學會第三十屆全國學術研討會，宜蘭，(2013)

32. 李宜勲、吳坤齡、廖振淵、林玉梅、顏炳華，行星式機構結合二維振動輔助磁力研磨應用於SUS304不鏽鋼曲面凹槽之研究，中國機械工程學會第三十屆全國學術研討會，宜蘭，(2013)

33.吳坤齡、陳新仁、李英瑋，以鈦粉壓結電極進行氮氣中放電加工披覆氮化鈦之研究，中國機械工程學會第三十屆全國學術研討會，宜蘭，(2013)

34.吳坤齡、周承翰，應用電化學放電加工對氧化鋁材料之特性探，中國機械工程學會第     三十一屆全國學術研討會，台中，(2014)

35.葉金璋、藍坤志、吳坤齡、顏炳華，含石墨烯加工液於多晶矽電化學磨削之研究，中國機械工程學會第三十一屆全國學術研討會，台中，(2014)

  36.吳坤齡，電極密度與成份對氮氣中進行放電加工被覆氮化鈦(TiN)層之影響研究，102 年科技部工程處機械固力、熱流、能源學門聯合成果發表會，台中，(2014)

37. 吳坤齡、郭寬淵、楊智宇、黃育威，結合平面振動與主軸複雜路徑之磁力研磨設備開發與研究(I)，科技部工程司104年度機械固力、熱流、能源聯合成果發表會，高雄，(2015)

38. 吳坤齡，楊智宇，葉金璋，應用電化學放電加工對氧化鋯進行鑽孔之特性探討，中國機械工程學會第32屆全國學術研討會，高雄，(2015)

39.吳坤齡，賴月梅，李新民，黃育威，應用精密拋光法於氧化鋁陶瓷之加工研究，中國機械工程學會第三十三屆全國學術研討會，新竹，(2016)

40.吳坤齡,賴月梅、金冠樺、蔡政霖、林建璋，電化學放電加工對氧化鋁陶瓷材料鑽孔之研究，中國機械工程學會第三十四屆全國學術研討會，台中，(2017)

41.吳坤齡、賴月梅、卓耕毅、蔡政霖、林建璋，結合振動輔助磁力對SUS304不鏽鋼研磨之研究，中國機械工程學會第三十五屆全國學術研討會，嘉義，(2018)

42. 吳坤齡、葉金璋、賴月梅、蔡政霖，行星式雙碟型主軸旋轉結合磁力研磨對表面粗糙度之研究，中國機械工程學會第三十六屆全國學術研討會，台北，(2019)

43. 吳坤齡、葉金璋、賴月梅、許世祥，玻璃纖維含量對空氣濾清器外殼形狀模流分析之研究，中國機械工程學會第三十七屆全國學術研討會，雲林，(2020)

 (D) 專業證照

    1.車床工乙級(行政院勞委會002-00**89)

    2.鉗工乙級(行政院勞委會003-01**44)

    3.汽車修護乙級(行政院勞委會020-03**18)

 (E) 參與科技部專題研究計畫