| 機械系教師期刊論文 | ||||||||||
| 項次 | 中文姓名 | 年度 | 作者 | 論文名稱 | 刊物名稱 | 發表卷數 | 發表期數 | 發表日期 | 審查狀態 | 修改日期 |
| 1 | 李志偉 | 95 | Jyh-Wei Lee,Shih-Kang Tien,Yu-Chu Kuo | The Effects of Pulse Frequency and Substrate Bias to the Mechanical Properties of CrN Coatings Deposited by Pulsed DC Magnetron Sputtering | Thin Solid Films | 494 | 1 | 2006/1/2 | 通過 | 16:53.9 |
| 2 | 李志偉 | 95 | Jyh-Wei Lee,Shih-Kang Tien,Yu-Chu Kuo,Chih-Ming Chen | The mechanical properties evaluation of the CrN coatings deposited by pulsed DC magnetron sputtering | Surface & Coatings Technology | 200 | 10 | 2006/2/1 | 通過 | 16:53.9 |
| 3 | 李志偉 | 95 | F.B. Wu, S. K. Tien, Jyh-Wei Lee, J. G. Duh | Comparison in microstructure and mechanical properties of nanocomposite CrWN and nanolayered CrN/WN coatings | Surface & Coatings Technology | 200 | 10 | 2006/2/1 | 通過 | 04:03.2 |
| 4 | 李志偉 | 95 | Jyh-Wei Lee, Y. C. Kuo, Y. C. Chang | Microstructure and Mechanical Properties of Pulsed DC Magnetron Sputtered Nanocomposite Cr-Cu-N Thin Films | Surface & Coatings Technology | 201 | 7 | 2006/12/1 | 通過 | 06:56.9 |
| 5 | 李志偉 | 95 | Jyh-Wei Lee, Y. C. Kuo, Y. C. Chang | A Study on the Microstructure and Cyclic Oxidation Behavior of Pack Aluminized Hastelloy X at 1100℃ | Surface & Coatings Technology | 201 | 7 | 2006/12/1 | 通過 | 09:57.6 |
| 6 | 蔡豐欽 | 95 | Tsai, F. C. and Hsieh, R. H. | Oblique Effects on The Capture Ability of a Hood Under Crosswind Environments – Numerical method | Building and Environment | 41 | 2006/8/1 | 通過 | 54:47.1 | |
| 7 | 吳坤齡 | 95 | Biing Hwa Yan, Kun Ling Wu, Fuang Yuan Huang, Chun Chieh Hs | A study on the mirror surface machining by using a micro-energy EDM and the electrophoretic deposition polishing | The International Journal of Advanced Manufacturing Technology | 2006/1/26 | 通過 | 19:06.6 | ||
| 8 | 陳坤男 | 95 | Chen, M. J., Chen, Kun-Nan and Lin, C. W. | Development and Verification of an Optimum Composition Model for a Synbiotic Fermented Milk Using Sequential Quadratic Programming Techniques | Asian-Aust. Journal Animal Science | 19 | 10 | 2006/3/21 | 通過 | 03:18.7 |
| 9 | 陳坤男 | 95 | Chen, Kun-Nan*, Gau, W. H. and Hu, Y. C. | Identification of Material and Geometrical Parameters for Microstructures by Dynamic Finite Element Model Updating | Microsystem Technologies | 12 | 8 | 2006/2/28 | 通過 | 02:07.9 |
| 10 | 陳坤男 | 95 | Chen, Kun-Nan | Optimal Support Locations for a Printed Circuit Board Loaded with Heavy Components | Journal of Electronic Packaging | 128 | 2006/12/1 | 通過 | 08:06.1 | |
| 11 | 陳坤男 | 95 | Chen, Kun-Nan | Model Updating and Optimum Designs for V-shaped Atomic Force Microscope Probes | Engineering Optimization | 38 | 7 | 2006/10/1 | 通過 | 14:06.0 |
| 12 | 翁文德 | 95 | T.H. Hsu, J.Y. Lai and W.D. Ueng | On the Development of Airfoil Section Inspection and Analysis Technique | International Journal of Advanced Manufacturing Technology | 30 | 1 | 2006/8/1 | 通過 | 01:17.4 |
| 13 | 鍾興遼 | 95 | 鍾興遼、賴月梅 | 核能電廠電纜托架支撐系統承受地震載荷之結構動態分析 | 東南學報 | 30 | 2006/6/30 | 通過 | 16:53.9 | |
| 14 | 林寬泓 | 96 | Kuan-Hong Lin, Shih-Feng Peng and Shun-Tian Lin | Sintering Parameters and Wear Performances of Vitrified Bond Diamond Grinding Wheels | International Journal of Refractory Metals and Hard Materials | 25 | 1 | 2007/1/1 | 通過 | 41:27.7 |
| 15 | 林寬泓 | 96 | Kuan-Hong Lin, Chen-Siang Hsu and Shun-Tian Lin | Microstructures of W-Mo-Ni-Fe Heavy Alloys | Materials Science Forum | 536 | 2007/2/1 | 通過 | 41:48.9 | |
| 16 | 林寬泓 | 96 | 徐子浩 林寬泓 林舜天 | 電漿熱噴塗高散熱氧化鋁/銅複合材料 | 粉末冶金會刊 | 32 | 4 | 2007/12/1 | 通過 | 37:44.7 |
| 17 | 李志偉 | 96 | 李志偉,黃仁清,李朝聖,張永鵬,康淵 | 單晶銅於奈米壓入之不連續應變現象 | 先進工程學刊 | 2 | 2 | 2007/11/2 | 通過 | 59:27.4 |
| 18 | 李志偉 | 96 | Jyh-Wei Lee, Yue-Chyuan Chang | A Study on the Microstructures and Mechanical Properties of Pulsed DC Reactive Magnetron Sputtered Cr-Si-N Nanocomposite Coatings | Surface & Coatings Technology | 2007/12/30 | 通過 | 00:19.5 | ||
| 19 | 李志偉 | 96 | Jyh-Wei Lee, Yu-Chu Kuo,Chaur-Jeng Wang, Yue-Chyuan Chang | The Effect of Cu Content on the Microstructures, Mechanical and Antibacterial Properties of CrCuN Nanocomposite Coatings Deposited by Pulsed DC Reactive Magnetron Sputtering | Surface & Coatings Technology | 2007/12/30 | 通過 | 45:50.5 | ||
| 20 | 李志偉 | 96 | L.C. Chang, Y. I. Chen, Jyh-Wei Lee, Yu-Chu Kuo,Chaur-Jeng Wang | Detaching Mechanism for Mo-Ru Hard Coating on Tungsten Carbide | Surface & Coatings Technology | 2007/12/30 | 通過 | 45:40.7 | ||
| 21 | 李志偉 | 96 | S.Y. Hu, Y.C. Lee, Jyh-Wei Lee, J.C. Huang, J.L. Shen | The structural and optical properties of ZnO/Si thin films by RTA treatments | Applied Surface Science | 2007/12/30 | 未審查 | 44:22.2 | ||
| 22 | 李志偉 | 96 | Shih-Kang Tien, Jenq-Gong Duh, Jyh-Wei Lee | Oxidation behavior of sputtered CrN/AlN multilayer coatings during heat treatment | Surface & Coatings Technology | 201 | 9 | 2007/2/1 | 通過 | 12:54.1 |
| 23 | 吳坤齡 | 96 | H.P. Tsui, B.H. Yan, K.L. Wu and W.C. Wu | Optimizing Electrochemical Buffing Control Parameters for Surface Finishing of Ultrahigh Purity Components | Advanced Materials Research | 2007/9/10 | 通過 | 29:15.1 | ||
| 24 | 吳坤齡 | 96 | Jung-Chou Hung1, Wei-ChiehWu, Biing-Hwa Yan,Fuang-Yuan Huang and Kun-LingWu | Fabrication of a micro-tool in micro-EDM combined with co-deposited Ni–SiC composites for micro-hole machining | JOURNAL OF MICROMECHANICS AND MICROENGINEERING | 17 | 2007/3/9 | 通過 | 09:15.2 | |
| 25 | 陳坤男 | 96 | Chen, Ming-Ju, Chen, Kun-Nan and Kuo, Yi-Tzu | Optimal thermotolerance of Bifidobacterium bifidum in gellan-alginate microparticles | Biotechnology and Bioengineering | 98 | 2 | 2007/10/1 | 通過 | 29:39.1 |
| 26 | 黃仁清 | 96 | Zone-Ching Lin and Jen-Ching Huang, Yeau-Ren Jeng | 3D Nano-scale Cutting Model for Nickel Material | Journal of Materials Processing Technology | 192 | 2007/10/1 | 通過 | 53:39.2 | |
| 27 | 黃仁清 | 96 | 黃仁清 | 銅在奈米等級之機械性質探討 | 東南學報 | 31 | 2007/6/30 | 通過 | 09:08.8 | |
| 28 | 黃仁清 | 96 | 李志偉,黃仁清,李朝聖,張永鵬,康淵 | 單晶銅於奈米壓入之不連續應變現象 | 先進工程期刊 | 2 | 2 | 2007/4/1 | 通過 | 29:45.6 |
| 29 | 黃仁清 | 96 | Zone-Ching Lin, Zhen-Da Chen and Jen-Ching Huan | Establishment of a Cutting Force Model and Study of the Stress-Strain Distribution in Nano-scale Copper Material Orthogonal Cutting | International Journal of Advanced Manufacturing Technology | 33 | 5 | 2007/2/18 | 通過 | 28:06.9 |
| 30 | 黃仁清 | 96 | Ship-Peng Lo, Yeou-Yih Lin and Jen-Ching Huang | Analysis of Retaining Ring using Finite Element Simulation in Chemical Mechanical Polishing Process | International Journal of Advanced Manufacturing Technology | 34 | 2007/7/18 | 通過 | 16:32.5 | |
| 31 | 黃仁清 | 96 | Zone-Ching Lin, Jen-Ching Huang and Bo-Jhan Zeng | The Analysis on the offset error of cross-section contour by using the simulated measurement model of atomic force microscopy | Journal of the Chinese Society of Mechanical Engineers | 28 | 1 | 2007/1/18 | 通過 | 18:56.3 |
| 32 | 黃仁清 | 96 | S.Y. Hu, Y.C. Lee, Jyh-Wei Lee, J.C. Huang, J.L. Shen, W.Water | The structural and optical properties of ZnO/Si thin films by RTA treatments | Applied Surface Science | 2007/12/29 | 未審查 | 57:32.8 | ||
| 33 | 黃仁清 | 96 | Zone-Ching Lin, Jen-Ching Huang and Bo-Jhan Zeng | The Analysis on the offset error of cross-section contour by using the simulated measurement model of atomic force microscopy | Journal of the Chinese Society of Mechanical Engineers | 28 | 1 | 2007/2/1 | 通過 | 24:50.2 |
| 34 | 翁文德 | 96 | K.J. Chen, Y.C. Tsai, J.Y.Lai and W.D.Ueng | B-spline Surface Fitting of Random Points with Constrained Boundary Conditions | International Journal of Computer Applications in Technology | 30 | 4 | 2007/12/15 | 通過 | 38:07.3 |
| 35 | 翁文德 | 96 | W.D. Ueng, J.Y. Lai and Y. Z. Tsai | Unconstrained and Constrained Curve Fitting for Reverse Engineering | The International Journal of Advanced Manufacturing Technology | 33 | 11 | 2007/8/15 | 通過 | 55:35.8 |
| 36 | 翁文德 | 96 | K.J. Chen, J.Y. Lai and W.D. Ueng | An Extended Surface Fitting Algorithm for Random Data | Journal of the Chinese Institute of Engineers | 30 | 5 | 2007/12/15 | 通過 | 00:13.2 |
| 37 | 林寬泓 | 97 | Kuan-Hong Lin, Yi-Cheng Lin, and Shun-Tian Lin | EFFECTS OF REDUCTION ATMOSPHERE AND NANO CARBON POWDER ADDITION ON THE DEOXIDIZATION OF INJECTION MOLDED ALUMINUM NITRIDE PARTS | Journal of Materials Processing Technology | 2008/3/1 | 補件 | 05:03.4 | ||
| 38 | 李志偉 | 97 | 李志偉, 張育銓, 郭裕竹,簡鴻喨 | 滲鋁處理對鎳基超合金Hastelloy X之高溫循環氧化行為的影響 | 防蝕工程 | 22 | 1 | 2008/3/3 | 未審查 | 48:01.2 |
| 39 | 李志偉 | 97 | 李志偉, 張育銓, 郭裕竹, 賴竣暉, 王偉仁, 杜經邦 | 固體滲鋁高熵合金之高溫氧化性質研究 | 防蝕工程 | 22 | 1 | 2008/3/3 | 未審查 | 48:13.0 |
| 40 | 陳坤男 | 97 | Chen, Kun-Nan, Chen, Ming-Ju and Shiu, Jia-Shian | Development of Probiotic Candies with Maximum Viability by Using Response Surface Methodology and Sequential Quadratic Programming | Asian-Aust. Journal Anim. Science | 21 | 6 | 2008/6/1 | 未審查 | 38:30.2 |
| 41 | 張晉昌 | 97 | 張晉昌 | 高職學生不同學習風格對數位學習成效影響之研究 | 技術及職業教育學報 | 2 | 1 | 2008/5/8 | 未審查 | 43:24.8 |
| 42 | 巫維標 | 97 | 巫維標 | investigation for effects of face-milling parameters of ultra-large-scale plan on milling quality int j adv manuf technol | Journal | 1905/6/30 | ||||
| 43 | 巫維標 | 97 | 巫維標 | 漸進式進給率鑚削加工技術 | 產學合作成果專刊 | |||||
| 44 | 巫維標 | 97 | 巫維標 | 混合式鑚消型態鑚孔加工技術 | 產學合作成果專刊 | |||||
| 45 | 巫維標 | 97 | 巫維標 | 油壓機械之油壓箱封蓋板溝槽加工技術 | 產學合作成果專刊 | |||||
| 46 | 羅玉山 | 96 | 羅玉山 | 風扇性能測試風洞之設計 | 設計與產學學報 | 4 | 2006/5/1 | |||
| 47 | 賴月梅 | 95 | 鍾興遼、賴月梅 | 核能電廠電纜托架支撐系統承受地震載荷之結構動態分析 | 東南學報 | 30 | 2006/6/30 | |||