個人檔案【林寬泓】
| 姓名 | ：林寬泓 |
| 級職 | ：教授 |
| 學歷 | ：國立台灣科技大學機械工程研究所 材料組博士、國立台灣師範大學工業教育研究所機械組碩士、國立台灣教育學院工業教育學系機械組學士 |
| 研究領域 | ：粉末冶金、陶瓷材料、顯微結構分析 |
| 校內分機 | ：02-86625917分機66 |
| 研究室 | ：信義403-4 |
| ：khlin@mail.tnu.edu.tw |
個人經歷【林寬泓】
東南科技大學 機械工程系 教授 (2011.02 ~ )
東南科技大學 教務長 (2009.05 ~2011.07 )
行政院勞工委員會職業訓練局泰山職業訓練中心 雙軌訓練旗艦計畫-工業機械職類試題審查委員
中華民國職業訓練研究發展中心 雙軌訓練旗艦計畫-工業機械職類召集人
德霖技術學院 機械工程系 兼任副教授
東南技術學院 機械工程系主任 兼 機電整合研究所所長 (2004.02 ~ 2006.07)
東南科技大學 機械工程系 副教授
經濟部 智慧財產局 兼任專利審查委員
教育部 技職體系機械群一貫課程 研究員
東南技術學院 機械工程系 講師
高工 機工科專任教師
預官34期特官 砲兵少尉
個人著作【林寬泓】
A. 期刊論文
1. 林寬泓, 許振聲, 林舜天, “鉬元素對液相燒結鎢基重合金顯微結構之影響”, 粉末冶金會刊, vol. 26, no. 1, pp. 6-14, 2001. (ISSN 2076-8680)
2. 林舜天, 林寬泓, “液相燒結鎢基重合金顯微組織與射出成形研究”, 粉末冶金會刊, vol. 26, no. 3, pp. 137-152, 2001. (2001海峽兩岸粉末冶金技術研討會, 2001.08.23 - 24,台灣,苗栗.) (ISSN 2076-8680)
3. 林寬泓, 許振聲, 林舜天, “液相燒結W-Mo-Ni-Fe重合金顯微結構與界面析出相研究”，粉末冶金會刊, vol. 27, no. 3, pp. 203-211, 2002. (ISSN 2076-8680)
4. Kuan-Hong Lin, Chen-Sheng Hsu and Shun-Tian Lin, “Variables on the Precipitation of an Intermetallic Phase for Liquid Phase Sintered W-Mo-Ni-Fe Heavy Alloys”, International Journal of Refractory Metals and Hard Materials, vol. 20, no. 5-6, pp. 401-408, 2002. (SCI)
5. Kuan-Hong Lin, Chen-Sheng Hsu and Shun-Tian Lin, “Precipitation of an Intermetallic Phase in Mo-alloyed Tungsten Heavy Alloys”, Materials Transaction, vol. 44, no. 3, pp. 358-366, March, 2003. (SCI)
6. Kuan-Hong Lin, Chen-Sheng Hsu and Shun-Tian Lin, “Precipitation Mechanism of an MoNi type Intermetallic Phase in W-27.0at%Mo-35.6at%Ni-17.6at%Fe”, International Journal of Refractory Metals and Hard Materials, vol. 21, no. 3-4, pp. 125-133, May-July, 2003. (SCI)
7. Kuan-Hong Lin, Chen-Sheng Hsu and Shun-Tian Lin, “Structure Analysis of the Constitutional Phases in Liquid Phase Sintered W-Mo-Ni-Fe Heavy Alloys”, International Journal of Refractory Metals and Hard Materials, vol. 21, no.3-4, pp. 193-203, May-July, 2003. (SCI)
8. Kuan-Hong Lin, Chen-Sheng Hsu and Shun-Tian Lin, “Role of Mo in Liquid-Phase- Sintered W-Mo-Ni-Fe Heavy Alloys”, Journal of the Japan Society of Powder and Powder Metallurgy, vol. 11, no.50, pp.1004-1008, Nov, 2003. (EI, ISSN 0532-8799)
9. 林寬泓, 彭世豐, 林舜天, “玻璃基鑽石工具燒結參數研究”, 粉末冶金會刊, vol. 29, no. 4, pp. 264-272, 2004. (NSC-92-2626-E-236-001) (ISSN 2076-8680)
10. Chen-Siang Hsu, Kuan-Hong Lin, and Shun-Tian Lin, “Precipitation Mechanisms of Intermetallic Compounds in W-Mo-Ni-Fe Alloys”, International Journal of Refractory Metals and Hard Materials, vol. 23, no.3, pp. 175-182, 2005. (SCI)
11. 許振聲, 林寬泓, 林舜天, “W-Mo-Ni-Fe重合金介金屬相析出機制研究”, Fenmo Yejin Jishu/Powder Metallurgy Technology, vol.23, no. 1, pp. 1-11, Feb. 2005. (EI, ISSN 1001-3784)
12. 林寬泓, 彭世豐, 林舜天, “玻璃基鑽石砂輪磨耗性能分析”, 中華民國陶業研究學會會刊, vol. 24, no. 2, pp. 48-57, 2005. (ISBN 1012-5442) (NSC-92-2626-E-236-001)
13. 許振聲, 林寬泓, 林舜天, “W-Mo-Ni-Fe重合金析出相研究”, 粉末冶金會刊, vol. 30, no. 2, pp. 119-129, 2005.06. (ISSN 2076-8680)
14. Kuan-Hong Lin*, Shih-Feng Peng and Shun-Tian Lin, “Sintering Parameters and Wear Performances of Vitrified Bond Diamond Grinding Wheels”, International Journal of Refractory Metals and Hard Materials, vol.25, no.1, pp.25-31, Jan. 2007. (SCI) (NSC-93-2216-E-236- 003)
15. Kuan-Hong Lin, Chen-Siang Hsu and Shun-Tian Lin. Microstructures of W-Mo-Ni-Fe Heavy Alloys. Materials Science Forum, vol.536, pp.1273-1276, 2007. (EI, ISSN 0255-5476)
16. 徐子浩, 林寬泓, 林舜天. 電漿熱噴塗高散熱氧化鋁/銅複合材料. 粉末冶金會刊, vol. 32, no.4, pp. 232-238, 2007.11. (ISSN 2076-8680)
17. 林寬泓, 謝育展, 楊岳霖, 林舜天. 金屬粉末射出成形轉軸元件磨耗行為分析. 粉末冶金會刊, vol. 33, no.1, pp. 15-26, 2008.02. (ISSN 2076-8680)
18. Kuan-Hong Lin*, Yi-Cheng Lin and Shun-Tian Lin. Effects of Reduction Atmosphere and Nano Carbon Powder Addition on the Deoxidization of Injection Molded Aluminum Nitride Parts. Journal of Materials Processing Technology, vol. 201, pp.701-705, 26 May 2008. (SCI)
19. Chang-Lun Liao, Kuan-Hong Lin* and Shun-Tian Lin. Effects of alkali-borosilicate glass addition on the microstructure and dielectric properties of Ba0.88(Nd1.40Bi0.42La0.30)Ti4O12. Journal of Ceramic Processing Research, vol. 9, No. 6, pp. 562-568, Nov. 2008. (SCI)
20. 林寬泓, 謝育展, 丁祥軒, 林舜天. 金屬粉末射出成形Fe-2Ni合金機械性質分析. 粉末冶金會刊, vol. 34, no.2, pp. 85-96, 2009.05. (ISSN 2076-8680)
21. 謝定洲, 林寬泓, 林舜天. 粗細鐵粉比例對壓粉磁蕊磁性質之影響. 粉末冶金會刊, vol. 34, no. 3, pp. 137-147, 2009.08. (ISSN 2076-8680)
22. Kuan Hong Lin*, Zi Hao Xu and Shun Tian Lin. Effect of Plasma Spray Coating Parameters on the Microstructure and Performance of an Alumina/Copper Composite. in: Characterization and Control of Interfaces for High Quality Advanced Materials III, Ceramic Transactions, vol. 219, pp. 379-384, Aug. 2010, (EI, ISSN 1042-1122).
23. Kuan-Hong Lin*, Chang-Lun Liao and Shun-Tian Lin. A study on the interfacial reaction and dielectric properties of Ba0.88(Nd1.40Bi0.42La0.30)Ti4O12/alkali-borosilicate glass composites. Ceramics International, vol. 36, No. 8, pp. 2365-2374, Dec. 2010. (SCI)
24. Kuan-Hong Lin*, Yu-Chan Hsieh and Shun-Tian Lin. Microstructure and Mechanical Performance Analysis of Metal-injection-molded Fe-2Ni Sintered Components. American Institute of Physical, vol. 1315, pp. 707-12. 17th, Jan., 2011. (ISBN 978-0-7354-0871-5)
25. Kuan Hong Lin*, Zi-Hao Xu and Shun-Tian Lin. A study on Microstructure and Dielectric Performances of Alumina/Copper Composites by Plasma Spray Coating. Journal of Materials Engineering and Performance, vol. 20, No. 2, pp. 231-237, March, 2011. DOI: 10.1007/s11665-010-9678-1. (SCI)
26. Kuan-Hong Lin*. Wear behavior and mechanical performance of metal injection molded Fe-2Ni sintered components. Materials and Design, vol. 32, no.3, pp. 1273-82, March, 2011. (SCI)
27. Hsueh-Han Wu, Kuan-Hong Lin* and Shun-Tian Lin. Efficient heat dissipation design of high-power multi-chip COB package LED modules. Advanced Materials Research, vol. 463-464, pp. 1332-40, Feb. 2012. (EI, ISSN 1022-6680)
28. Hsueh-Han Wu, Kuan-Hong Lin and Shun-Tian Lin. A study on the heat dissipation of high power multi-chip COB LEDs. Microelectronics Journal, vol. 43, no.4, pp. 280-87, April, 2012. (SCI)
29. 吳學翰, 林寬泓, 林舜天. 多晶片COB封裝之高功率LED的散熱分析. Journal of Technology, vol. 27, no. 2, pp. 73-80, June, 2012. (EI, ISSN 1012-3407).
30. 羅嫈妮, 林寬泓*. 奈米碳黑對磷酸鋰鐵電性影響之研究. 粉末冶金會刊, vol. 38, no. 2, pp. 93-98, 2013.05. (ISSN 2076-8680)
31. 孫愉翔, 林寬泓*. 燒結參數對金屬粉末射出成型SKD11元件顯微組織與機械性能影響之研究. 粉末冶金會刊, vol. 38, no. 4, pp. 249-257, 2013.11 (ISSN 2076-8680)
32. Yuo-Tern Tsai, Kuan-Hong Lin and Yung-Yuan Hsu. Reliability design optimisation for practical applications based on modelling processes. Journal of Engineering Design, vol. 24, no.12, pp. 849-863, Dec. 2013. (SCI)
33. Ding-Zhou Xie, Kuan-Hong Lin* and Shun-Tian Lin. Effects of processed parameters on the magnetic performance of a powder magnetic core. Journal of Magnetism and Magnetic Materials, vol. 353, pp. 34-40, March, 2014. (SCI)
34. 孫愉翔, 蔡有藤, 林寬泓*. 燒结參數對玻璃基鑽石工具顯微結構與機械性能影響之研究. 粉體及粉末冶金會刊, vol. 39, no. 4, pp. 1-12, 2014.11. (ISSN 2076-8680)
35. Yu-Xiang Sun, Yuo-Tern Tsai and Kuan-Hong Lin*. The influence of sintering parameters on the mechanical properties of vitrified bond diamond tools. Materials and Design, vol. 80, pp. 89-98, Sep. 2015. (SCI)
36. 王克倫, 蔡有藤, 林寬泓*. 添加奈米氮化鋁對玻璃基鑽石工具顯微結構與機械性能影響之研究. 粉體及粉末冶金會刊, vol. 41, no. 1, pp. 14-22, 2016.02. (ISSN 2076-8680)
37. Ying-Ni Luo, Yuo-Tern Tsai and Kuan-Hong Lin*. The influence of added nano carbon black on the electrical properties of the cathode of a lithium-ion secondary battery. Journal of Ceramic Processing Research. vol. 17, No. 10, pp. 1082-87, Oct. 2016. (SCI)
38. Yuo-Tern Tsai and Kuan-Hong Lin. Structural stress analysis and reliability evaluation for a new speed reducer. Journal of Mechanics. vol. 33, No. 5, pp. 631-40, Oct. 2017. (SCI)
B. 研討會論文
1. Cheng-Sheng Hsu, Pi-Chuan Tsai, Kuan-Hong Lin and Shun-Tian Lin, “Tungsten Heavy Alloys in the Incipient Stage of Liquid Phase Sintering”. In Advances in Powder Metallurgy and Particulate Materials-2000, Compiled by H. Ferguson and D.T. Whychell, Sr., Metal Powder Industries Federation, New York, vol. 8, pp. 165-173, 2000. (EI, ISSN 1042-8860). (2000 International Conference on Powder Metallurgy and Particulate Materials, New York, USA, May 30–June 03, 2000.)
2. 林寬泓*, 許振聲, 蔡丕椿, 林舜天, “液相燒結鎢基重合金固相-液相界面層研究”, 中國材料科學學會2001年會, 2001.11.23-24, 台灣, 台中, (CD論文集pp.02-13).
3. Kuan-Hong Lin*, Cheng-Sheng Hsu and Shun-Tian Lin, “Microstructure and Interface Analysis of Liquid Phase Sintered W-Mo-Ni-Fe Heavy Alloys”. In Advances in Powder Metallurgy and Particulate Materials-2002, Compiled by V. Arnhold, C.L. Chu, W.F. Jandeska, Jr. and H.I. Sanderow, Metal Powder Industries Federation, New York, vol. 13, pp. 224-236, 2002. (EI, ISSN 1042-8860). (World Congress on Powder Metallurgy and Particulate Materials, Orlando, USA, 16-21 June 2002. Oral presented by Kuan-Hong Lin).
4. 林寬泓*, 許振聲, 林舜天, “液相燒結持溫時間對W-Mo-Ni-Fe重合金微結構之影響”, 中國材料科學學會2002年會, 2002.11.22-23, 台灣, 台北, (CD論文集PB-09).
5. 林寬泓*, 許振聲, 林舜天, “液相燒結W-Mo-Ni-Fe重合金性質研究”, 中國材料科學學會2003年會, 2003.11.21-22, 台灣, 台南, (CD論文集PB-022).
6. Kuan-Hong Lin*, Cheng-Sheng Hsu and Shun-Tian Lin, “Effect of Cooling Rate on the Structure of Liquid Phase Sintered W-27.8Mo-22.5Ni-10.6Fe Alloy”. In PM 2004 World Congress Proceedings, vol. 5, pp. 375-381, European Powder Metallurgy Association, Shrewsbury, UK, 2004. (ISBN 1899072-15-2). (Powder Metallurgy 2004 World Congress and Exhibition, Vienna, Austria, 17-21 Oct. 2004. Presented by Kuan-Hong Lin)
7. 彭世豐, 林寬泓, 林雲躍, 林舜天, “硼矽玻璃-鑽石複合材料界面特性對機械性能之影響”, 中華民國陶業學會2005年年會, 2005.05.25, 台灣, 台南. (NSC-93-2216-E-236-003)
8. Shih-Feng Peng, Yun-Yue Lin, Kuan-Hong Lin and Shun-Tian Lin, “Reaction of diamond with a borosilicate glass”, O-4-PO63, (2005 International Conference on Materials for Advanced Technologies, ICMAT 2005, Singapore, July 3-8, 2005.) (NSC-93-2216-E-236- 003)
9. Kuan-Hong Lin*, Shih-Feng Peng, Yun-Yue Lin and Shun-Tian Lin,“ Sintering Parameters on the Performances of A Borosilicate Glass-Diamond Composite”. In Advances in Powder Metallurgy & Particulate Materials-2006, Compiled by William R Gasbarre and John W. von Arx, Metal Powder Industries Federation, New York, vol. 9, pp. 15-24, June, 2006. (EI, ISSN 1042-8860). (International Conference on Powder Metallurgy & Particulate Materials, San Diego, USA, June 18-21, 2006. Oral presented by Kuan-Hong Lin).
10. Kuan-Hong Lin, Chen-Siang Hsu and Shun-Tian Lin, “Microstructures of W-Mo-Ni-Fe Heavy Alloys”, Session Title: C08-04 Refractory Materials, (2006 Powder Metallurgy World Congress & Exhibition (PM2006), Busan, Korea, September 24-28.) (Published in Materials Science Forum)
11. Kuan-Hong Lin*, Yi-Cheng Lin, and Shun-Tian Lin, ”Effects of Reduction Atmosphere and Nano Carbon Powder Addition on the Deoxidization of Injection Molded Aluminum Nitride Parts”. In Proceedings of the 10th Advances in Materials and Processing Technologies, pp. 1662-73. (The 10th International Conference on Advances in Materials and Processing Technology, Daejeon, Korea, Oct. 7-11, 2007. Oral presented by Kuan-Hong Lin) (Published in Journal of Materials Processing Technology)
12. 林寬泓*, 劉政昆, 王人胤, 唐自鶴, 江衍坤, 謝公仁, “高發熱電子元件使用之高導熱相變化型複合材料研發”, 97年中華民國材料科學學會年會, 2008.11.21-22, 台灣, 台北, (CD論文集P09-007).
13. Kuan Hong Lin*, Zi Hao Xu and Shun Tian Lin, “Effect of Plasma Thermal Spray Coating Parameters on the Microstructure and Performance of Alumina/Copper Composite”. (The Third International Conference on the Characterization and Control of Interfaces for High Quality Advanced Materials, and Joining Technology for New Metallic Glasses and Inorganic Materials, ICCCI-2009, Kurashiki, Japan, Sep. 6-9, 2009. Oral presented by Kuan-Hong Lin). (Published in Ceramic Transactions)
14. Kuan-Hong Lin*, Yu Chan Hsieh and Shun Tian Lin, “Microstructure and Mechanical Performance Analysis of Metal-injection-molded Fe-2Ni Sintered Components”. (Advances in Materials and Processing Technologies 2010, Paris, France, Oct. 24-27, 2010, Oral presented by Kuan-Hong Lin). (Published in American Institute of Physical)
15. Yu Ping Fang and Kuan-Hong Lin*, “Thermal Dissipation Analysis of LED Street Lamp modules”. In Proceeding of the 2010 International Conference on Clean Nano Process, Green Energy, Nanotechnology and Computational Mechanics, pp. 77-81. Dec. 8-10, 2010, Taipei, Taiwan. (ISBN 978-986-412-799-3)
16. Kuan-Hong Lin*, Yu-Xiang Sun, Guan-Lin Chen, Kai-Ming Lin, Yu-Chan Hsieh, ”Effect of sintering temperature on the microstructure and mechanical properties of MIM SKD11 component”. In Advances in Powder Metallurgy & Particulate Materials 2011, Compiled by Iver Eric Anderson and Thomas W. Pelletiers, Metal Powder Industries Federation, New York, Part 4, pp. 13-20, 2011. (EI, ISSN 1042-8860) (2011 International Conference on Powder Metallurgy & Particulate Materials, May 18–21, San Francisco, CA, USA. Oral presented by Kuan-Hong Lin).
17. Hsueh-Han Wu, Kuan-Hong Lin* and Shun-Tian Lin, “Efficient heat dissipation design of high-power multi-chip COB package LED modules”, (International Conference on Advanced Material Research, ICAMR 2012, Jan. 7-8, 2012, Chengdu, China.) (Published in Advanced Materials Research)
18. 蔡有藤, 林寬泓, 廖顯大, “機械裝置可靠度設計最佳化之研究”, 2012 第二十屆全國自動化科技研討會, pp.153-1-5, 2012.11.02-03, 臺灣, 桃園.
19. 陳奐晞, 蔡有藤, 孫愉翔, 林寬泓*, ”粉末特性對金屬粉末射出成型SKD11元件顯微組織影響之研究”, 101年中國材料科學學會年會論文集, pp. 2719-22, 2012.11.23-24, 台灣, 雲林.
20. 陳奐晞, 蔡有藤, 孫愉翔, 林寬泓*, ”燒結參數與粉末特性對MIM SKD11元件機械性能影響之研究”, 101年中國材料科學學會年會論文集, pp. 2723-26, 2012.11.23-24, 台灣, 雲林.
21. Huan-Xi Chen, You-Tern Tsai, and Kuan-Hong Lin*, “Effect of Sintering Parameters and Powder Characteristics on the Performance of Metal-Injection-Molded SKD11 Parts”, In Proceedings of the World Congress on Engineering 2013, Compiled by S. I. Ao, Len Gelman, David WL Hukins, Andrew Hunter and A. M. Korsunsky, vol. 3, pp, 1825-1830, 3-5 July, 2013, London, UK. (EI, ISSN 2078-0958)
22. Yuo-Tern Tsai, Kuan-Hong Lin and Lu-Sin Liu. ”A Study of Reliability Optimization Design for Robots Based on Finite Element Analysis”. In Proc. of the 3rd IFToMM International Symposium on Robotics and Mechatronics (ISRM 2013), edited by I-Ming Chen, Marcelo Ang, Guilin Yang, Kin Huat Low and Albert Causo, pp. 483-492. 1-4, Oct., 2013, Singapore.
23. Yuo-Tern Tsai, Kuan-Hong Lin and Kuo-Shong Wang. “A study of structural stress analysis of reducers for supporting reliability design”. In Proceedings of the 4th IFToMM International Symposium on Robotics and Mechatronics (ISRM 2015), edit by Saïd Zeghloul, Med Amine Laribi and Jean-Pierre Gazeau, pp.3-13. 23-25, June, 2015. Poitiers. France.
24. Ying-Ni Luo, Yuo-Tern Tsai and Kuan-Hong Lin*. “Effects of Added Nano Carbon Black on the Cathode of a Lithium-Ion Secondary Battery”. In Proceedings of the 22nd International Symposium on Metastable, Amorphous and Nanostructured Materials (ISMANAM 2015), PS2-041. 13-17, July, 2015. Paris, France.
25. Yuo-Tern Tsai, Kuan-Hong Lin and Lu-Sin Liu. "A study of fatigue life estimation for differential reducers". In Proceedings of the 2nd International Symposium on Engineering and Applied Science, pp.83-90. August 09- 11, 2016, Hawaii, USA.
C. 技術報告及其他論文：
1. 林寬泓, “添加鉬元素對液相燒結鎢基重合金顯微結構之影響”, 東南機械工程, No. 6, pp. 19-25, 2001.
2. 林寬泓, “液相燒結W-Mo-Ni-Fe重合金界面介金屬相形成之研究”, 東南機械工程, No. 7, pp. 32-36, 2002.
3. 林寬泓, “液相燒結W基重合金固液相及界面層研究”, 東南技術學院九十學年度研究論文發表選集, pp. 19-30, 2002.06.27.
4. 林舜天, 林寬泓, 黃世杰, “鎢-鉬-鎳-鐵合金微結構控制(1/3)”, 國科會專題研究計畫期中報告, NSC 90-2216-E-022-050, 2002.07.31.
5. 林舜天, 林寬泓, 黃世杰, “鎢-鉬-鎳-鐵合金微結構控制(2/3)”, 國科會專題研究計畫期中報告, NSC 91-2216-E-011-029, 2003.07.31.
6. 林舜天, 林寬泓, 林雲躍, 葉柏麟, “氮化鋁粉末性能提升研究”, 台鹽公司期末報告, 台灣科大建字 0242, 2003.07.31.
7. 林寬泓, “液相燒結W-Mo-Ni-Fe重合金顯微結構分析”, 東南技術學院九十一學年度研究論文發表選輯, pp. 163-180, 2003.09.25.
8. 林舜天, 林寬泓, 許振聲, “鎢-鉬-鎳-鐵合金微結構控制(3/3)”, 國科會專題研究計畫結案報告, NSC 92-2216-E-011-029, 2003.08.01 ~ 2004.07.31
9. 林寬泓, 彭世豐, “玻璃基材結合之鑽石砂輪製作”, 國科會專題研究計畫結案報告, NSC 92-2626-E-236-001, 2003.08.01 ~ 2004.07.31
10. 林寬泓, “玻璃基鑽石工具燒結參數研究”, 東南技術學院九十二學年度研究論文發表選輯, pp. 18-24, 2004.10.08
11. 林寬泓, 彭世豐, “玻璃結合鑽石工具微結構控制與性能提升”, 國科會專題研究計畫結案報告, NSC 93-2216-E-236-003, 2004.08.01 ~ 2005.07.31
12. 林寬泓, ”鎳鈷磷合金性能分析”,原進科技股份有限公司產學合作案結案報告, 2005.06.01 ~2006.05.31.
13. 林寬泓, ”電鑄參數對鎳鈷磷合金性能影響分析”, 原進科技股份有限公司產學合作案結案報告, 2006.09.01 ~ 2007.08.31. (東南95產學053號)
14. 林寬泓, 王人胤, 唐自鶴, “高功率LED及高發熱電子元件使用之高導熱相變化型複合材料研發”, 國科會專題研究計畫結案報告, NSC 96-2622-E-236-002-CC3, 2007.11.01 ~ 2008.10.31
15. 林寬泓, “鋁質熱管製作技術開發”, 98年度學界協助中小企業科技關懷計畫結案報告, 經濟部科技專案計畫, 2009.03 ~ 2009.08.
16. 林寬泓, 謝定洲, 林舜天, “磷化處理與退火溫度對壓粉磁蕊磁性質之影響”, 東南學報, No.35, pp. 15-26, 2010.06.
D.其他協助產業技術發展之具體績效
1. "燒結W-8Mo-7Ni-3Fe合金機械性質與基地相固溶析出關係之研究", 主持人, 東南工專 八十八學年度 教師專案研究計劃, 1999.08.01 ~ 2000.07.31
2. "Mo元素含量對燒結鎢基重合金顯微結構影響之研究", 主持人, 東南技術學院 八十九學年度 教師專案研究計劃, 2000.08.01 ~ 2001.07.31
3. "液相燒結W-Mo-Ni-Fe重合金顯微結構研究", 主持人, 東南技術學院 九十學年度 教師專案研究計劃, 2002.01.01 ~ 2002.10.31
4. "氮化鋁粉末性能改良", 共同主持人, 台鹽公司, 台科大建字 0242, 2002.08.01 ~ 2003.07.31
5. "玻璃基材結合之鑽石砂輪製作", 主持人, 國科會, 計畫金額 261,300元, NSC 92-2626-E-236-001, 2003.08.01 ~ 2004.07.31
6. "鑽石工具性能分析", 主持人, 鑽德科技公司, 產學合作案, 2004.08.01 ~ 2005.07.31
7. "玻璃結合鑽石工具微結構控制與性能提升", 主持人, 國科會, 計畫金額 521,700元, 計畫編號 NSC 93-2216-E-236-003, 2004.08.01 ~ 2005.07.31
8. "氮化鋁燒結技術及應用市場開發", 共同主持人, 台鹽公司, 台科大機建字 0306, 2005.04.01 ~ 2005.12.31
9. "鎳鈷磷合金性能分析", 主持人, 原進科技股份有限公司, 產學合作案, 2005.06.01 ~ 2006.05.31
10. "電鑄參數對鎳鈷磷合金性能影響分析", 主持人, 原進科技股份有限公司, 產學合作案, 2006.09.01 ~ 2007.08.31
11. "高功率LED及高發熱電子元件使用之高導熱相變化型複合材料研發", 主持人, 國科會, 計畫金額 522,000元, 計畫編號 NSC 96-2622-E-236-002-CC3, 2007.11.01 ~ 2008.10.31
12. "鋁質熱管製作技術開發", 主持人, 經濟部, 學界協助中小企業科技關懷計畫, 計畫金額 72,000元, 計畫編號 PT097130202, 2009.03.01 ~ 2009.08.31
13. "氣氛燒結爐", 主持人, 陽傑科技公司, 技術服務案, 計畫編號 TNU-ME-MTLAB-2009-001, 2009.05.11 ~ 2009.06.11
14. "鋰電池正負極材料性能分析", 主持人, 兢界科技股份有限公司, 產學合作案, 計畫編號 99產學第008號, 2010.02.25 ~ 2010.08.25
15. "陶瓷電容性能分析", 主持人, 星麗科技實業有限公司, 產學合作案, 計畫編號 99產學第020號, 2010.04.07 ~ 2011.04.06
16. "陶瓷電容材料開發與性能分析", 主持人, 星麗科技實業有限公司, 產學合作案, 計畫編號 100產學第025號, 2011.04.20 ~ 2012.04.19
17. "相變化導熱材料開發", 主持人, 鑽德科技股份有限公司, 產學合作案, 計畫編號 100產學第043號, 2011.07.01 ~ 2012.02.28
18. "導熱材料性質與製程分析", 主持人, 鑽德科技股份有限公司, 產學合作案, 計畫編號 100產學第064號, 2011.10.10 ~ 2012.10.09
19. "細粒度玻璃基鑽石工具製作與微結構控制", 主持人, 國科會, 計畫金額 590,000元, 計畫編號 NSC 101-2221-E-236-003, 2012.08.01 ~ 2013.07.31